astra_j114.pdf

(50 KB) Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
BACK TO CHAPTER INDEX
ASRA J BODY REPAIR MANUAL 2011
TO MODEL INDEX
BODY HARDWARE and TRIM
S e c tion 02
Instrument Panel and Console Trim
Instrument Panel Wiring Harness Replacement
Removal Procedure
1.
Note: Arrange a place to embed the removed parts.
2.
Install the MDI, turn on the ignition and read the diagnostic trouble codes.
• Delete all diagnostic trouble codes and read diagnostic trouble codes again.
• Notice ALL diagnostic trouble codes.
Open the bonnet and disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
3.
4.
Remove instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
5.
Remove the body control module (BCM). Refer to Body Control Module Replacement
6.
Release all mass cables from the tie bar and body weld studs.
7.
Release the instrument panel wiring harness.
Make pictures from the routing and fixing points of the instrument panel wiring harness for the orientation.
8.
Disconnect all electrical connectors and unscrew the ground cables.
8.1. Release all fixations.
8.2. Take care about destroyed cable straps and harness guidance regarding noises and rattles.
9.
Remove instrument panel wiring harness (2) from instrument panel tie bar (1) and lay it on the floor.
Unpack the new instrument panel wiring harness and compare the old with the new harness concerning quantity of fixing points, cable straps, guides, part
numbers and pin assignments.
Installation Procedure
881704482.004.png 881704482.005.png 881704482.006.png 881704482.007.png 881704482.001.png 881704482.002.png 881704482.003.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin