astra_j108.pdf
(
22 KB
)
Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
BACK TO CHAPTER INDEX
ASRA J BODY REPAIR MANUAL 2011
TO MODEL INDEX
BODY HARDWARE and TRIM
S e c tion 02
Floor Coverings And Headlinings
Floor Carpet Drying
If the carpet or the pad or insulator is wet, use the following criteria for drying or for replacing the components:
• For a 1-piece carpet assembly bonded to a cotton or a fibre padding, replace the entire assembly.
•
For a 2-piece carpet assembly with a cotton or a fibre padding, replace the padding only. While the carpet is out of the vehicle, dry the carpet using the
method described below.
• For a 1-piece carpet assembly bonded to a foam padding or attached to a synthetic padding, dry the carpet using the method described below.
•
For a 2-piece carpet assembly with a synthetic padding, dry the assembly using the method described below.
Drying Method
1.
If you observe puddles of liquid on the carpet face, use a wet vacuum to remove the excess moisture.
2.
Blot the face of the carpet with a towel in order to absorb as much moisture as possible.
3.
Point a fan at the affected area and air dry the carpet.
Plik z chomika:
tomus550
Inne pliki z tego folderu:
astra_j148.pdf
(29 KB)
astra_j155.pdf
(38 KB)
astra_j210.pdf
(41 KB)
astra_j243.pdf
(27 KB)
astra_j246.pdf
(38 KB)
Inne foldery tego chomika:
Doda - Aquaria (Deluxe) (2023)
Efekty dzwiękowe 3D koniecznie słuchawki !!!!!!!!!!
Elektronika
J.POLSKI
KOSMOS
Zgłoś jeśli
naruszono regulamin