BBAP1 KFm3 Wing Assembly Instructions.pdf

(43 KB) Pobierz

BBAP1 KFm3 Wing Assembly Instru

How to assemble a Blu-Baby AP 1 KFm3 Wing

Spar Assembly

Sand joining bevels on spar sections

Dihedral Jig

1. Glue one spar onto Forward Spar Joiner,

alinging spar with bottom of the Forward

Spar Joiner. Use 5 minute epoxy.

3. Glue Aft Spar to Forward Spar assembly

with any quality wood glue, maintaining

alignment with the bottom of the

Forward Spar assembly

2. Tape Dihedral Jig to the end of the other

Forward Spar and keeping the glued Spar flat,

align with Forward Spar Joiner and Forward Spar.

Glue with 5 minute epoxy, maintaining alignment.

4. Glue on Aft Spar Joiner to rear of the

Spar Assemby with 5 minute epoxy.

Wing Panel Assembly

Glue spar assm in place as shown on plan

Cut 45 degree bevel on both panels

Inside leading edge

Inside leading edge

KFm Panel (2)

2" Packing Tape (full span)

Wing Panel (1)

Fold KFm Panel back and over,

aligning the aft edge with spar.

Glue with PU glue and weight until dry

Glue KFm3 panel into place

Attach aileron with tape

hinges or plastic hinges

R1 C1

422789847.026.png

422789847.027.png

422789847.028.png

422789847.029.png

422789847.001.png

422789847.002.png

422789847.003.png

422789847.004.png

422789847.005.png

422789847.006.png

422789847.007.png

422789847.008.png

422789847.009.png

422789847.010.png

422789847.011.png

422789847.012.png

422789847.013.png

422789847.014.png

422789847.015.png

422789847.016.png

422789847.017.png

422789847.018.png

422789847.019.png

422789847.020.png

422789847.021.png

422789847.022.png

422789847.023.png

422789847.024.png

422789847.025.png

Plik z chomika:

Inne pliki z tego folderu:

42 inch Floats.pdf (23 KB)
BBAP1 52 in KFm3 wing parts full.pdf (42 KB)
BBAP1 52 in KFm3 wing parts tiled.pdf (60 KB)
BB42 UC Wing Saddle.pdf (28 KB)
Blu Baby 42 inch KFm3 Parts (full).pdf (43 KB)

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin