FOFIE02GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FORD

MOD. FIESTA * YEAR 02 ﬁ

PETROL

DIESEL

MAKE

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens behind the driver’s side headlamp.

Pass the cables using the rubber sleeve located on the bulkhead that divides the

engine compartment and the passenger’s compartment.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+30: connect to a positive that supply the fuse box.

-31: connect to an original ground terminal located on the left, under the

dashboard, driver’s side.

IGNITION WIRE

+15/54: connect to the WHITE/GREEN wire, at the position nr.1, in the black

connector above the brake pedal.

DIRECTION INDICATORS

Connect to the BLUE wire, at the position nr.7, and to the BLUE/RED wire at the

position nr.6, in the light blue connector in the central, under the steering column,

driver’s side.

ELECTRIC WINDOWS

Positive control signal

Front window driver’s side:

cut the WHITE wire in the 7 way black connctor, in the original push buttons panel.

Front windows passenger’s side:

cut the WHITE/VIOLET wire in the wiring harness coming out of the driver’s side

door.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Art. 3800 Vehicle Position

YELLOW/BLACK WHITE/RED Pos. nr. 4 in the green connector

GREY/BLACK YELLOW/RED Pos. nr. 3 in the green connector

VIOLET BLACK/RED Pos. nr. 9 in the green connector

ORANGE BLACK/GREEN Pos. nr.12 in the dark grey connector

VIOLET/WHITE ground car body

ORANGE/WHITE positive supply in the fuse box

The above green and grey connectors are located on the coming out of the central

doors locking unit located under the steering column.

Refer to the ‘C’ diagram of the dedicated installations manual inside the kit of the

antitheft.

IMMOBILISATION POINT

Inertial switch

Cut the GREEN/ORANGE wire directly in the wiring harness coming out of the

inertial switch located behind the passenger’s side glove compartment.

STARTER

+50: Cut the GREY/BLACK wire, at the position nr.7, in the 7 way black connector,

in the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS AND BOOT

SWITCHES

Connect to the BLACK/BLUE wire, at the position nr.3 in the dark grey connector,

in the central under the steering column, driver’s side.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fofie02gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: