ultimatearcade.pdf

(5867 KB) Pobierz
ultimatearcade.PDF
Ultimate Arcade
By CyberTech Design
www.cybertechdesign.net
I. Disclaimer
While the information provided in this document is believed to be accurate, it may include technical inaccuracies or typographical
errors. CyberTech Design does not guarantee satisfactory results from reliance upon any such information, and disclaims all
liability for loss or damage of any kind arising out of its use.
This publication is provided "AS IS" and CyberTech Design does not MAKE ANY EXPRESS OR IMPLIED REPRESENTATION
OR WARRANTY AS TO THE FITNESS, MERCHANTABILITY OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS,
PROCESSES OR EQUIPMENT OR ANY MANUFACTURER OR SUPPLIER REFERRED TO HEREIN, OR ANY PRODUCT OR
EQUIPMENT MANUFACTURED, PRODUCED OR SOLD BY ANY SUCH MANUFACTURER OR SUPPLIER, whether used
alone or in combination with any other product, materials or equipment.
Before adopting any of the recommendations or suggestions contained herein, we urge you to determine for yourself whether the
advice or procedures should be adopted for your use. Nothing contained herein is to be construed as a recommendation to use
any information, product, process or equipment in conflict with any patent trademark.
The information (including, without limitation, the photographs and artwork) contained in this document may not be distributed,
modified, reused, reposted, or otherwise used without the express written permission of CyberTech Design.
II. Before you begin
It is highly recommended that you measure all doorways and stairways leading to where your Ultimate Arcade cabinet will be
placed. You will need a minimum clearance of 27 inches in all doorways and hallways to transport the finish cabinet. Be sure to
read through this entire document before assembly.
IMPORTANT: REMOVE TELEVISION OR MONITOR BEFORE TRANSPORTING THE ULTIMATE ARCADE CABINET.
III. Tools required
Please use safety goggles when cutting materials and during assembly.
Electric router
Circular saw
Jig saw
2 ” hole saw
1 1/4 “ hole saw
1 1/8 “ hole saw
1/8 “ drill bit
Paint brush
Paint roller
Paint tray
Screwdriver
Wire strippers
Tape measure
Metal ruler
Pencil / Pen
5/16" roundover router bit
326622126.191.png 326622126.202.png
Materials List
NOTE: Additional fasteners may be required for assembly if not included in hardware packages.
1-1/2" L-Brackets
68
www.homedepot.com
12" Side Mount Drawer Slides
2
www.homedepot.com
1-1/16" Threaded Nickel Glide
4
www.homedepot.com
Brass Mailbox Lock
1
www.homedepot.com
½” Long Flat Head Phillips Wood Screws (3/16” Dia)
280
www.homedepot.com
2” Long Flat Head Phillips Wood Screws (3/16” Dia)
20
www.homedepot.com
3/8” Long Round Head Wood Screws (1/8” Dia)
12
www.homedepot.com
Happ Controls Push Buttons (58-9144-L)
12
www.happcontrols.com
Happ Controls Player 1 Button (58-9111-L1PLY)
1
www.happcontrols.com
Happ Controls Player 2 Button (58-9111-L2PLY)
1
www.happcontrols.com
Happ Controls Ultimate 8way Joystick (50-7608-16)
2
www.happcontrols.com
Happ Controls Marquee retainer (49-1000-00)
1
www.happcontrols.com
KE72 Keyboard Encoder
1
www.hagstromelectronics.com
Piano Hinge 25" Long
1
www.homedepot.com
S-Video To Coax Converter (For TV without S-Video)
1
http://videoware.site.yahoo.net
25" Television (with S-Video)
1
www.sears.com
Shielded Speaker system
1
www.c-source.com
18” Fluorescent Lighting Fixture
1
www.homedepot.com
IDE Ribbon Cable
2
www.c-source.com
Electrical Terminals
44
www.homedepot.com
5/8" x 4' x 8' Particle Board
3
www.homedepot.com
1/8" x 25" x 26.2" Plexiglas
1
www.homedepot.com
1/8" x 25" x 7.25" Plexiglas
2
www.homedepot.com
2” x 4” x 8' Stud
2
www.homedepot.com
326622126.213.png 326622126.224.png 326622126.001.png 326622126.012.png 326622126.023.png 326622126.034.png 326622126.045.png 326622126.056.png 326622126.067.png 326622126.078.png 326622126.089.png 326622126.100.png 326622126.111.png 326622126.122.png 326622126.133.png 326622126.144.png
326622126.155.png
Material Layout
NOTE: Use the dimensions from the Cabinet Details drawing to layout each piece. To allow for blade width, layout and cut one piece at a time.
*** DRILL THE 2” DIAMETER HOLES BEFORE CUTTING OUT CABINET SIDES ***
Step 1
Use the material layout and cabinet details
drawings to layout and cut all of the cabinet
pieces from the 5/8” x 4’ x 8’ particle board
sheets. Before cutting out the cabinet side
panels, drill the two 2” diameter holes as
specified in the cabinet details drawing. Layout
and cut one cabinet piece at a time to allow for
the saw blade width. Mark each piece for
identification. NOTE: SOME PIECES REQUIRE A
MITER (ANGLED) CUT ALONG ONE OR MORE EDGES.
Step 2
Using the 5/16” roundover router bit, round all
corners and edges of the front and back of the
cabinet side panels.
Step 3
Using the 5/16” roundover router bit, round one
of the 24” edges (top and bottom) on the
keyboard drawer cutout.
Step 4
Using the 5/16” roundover router bit, round the
25” edge closest to the drilled hole (TOP ONLY)
on the hinged front panel.
326622126.156.png 326622126.157.png 326622126.158.png
Step 5
Using the control panel details drawing above, layout the location
of the button and joystick holes. Use the 1-1/4” hole saw to cut
out the (2) joystick holes. Use the 1-1/8” hole saw to cut out the
(12) player one and player two buttons. Use the 1-1/8” hole saw
to cut out the player one and player two selection buttons.
Note: Be sure that the angled edge is in the front and slopes
outward before drilling holes.
Step 6
Install joystick and buttons as shown in the diagram below.
Step 6a
Wire each switch using a ribbon
cable. Cut one end off of the ribbon
cable and separate each wire. Strip
off ¼” to ½” of insulation from every
other wire. Crimp an electrical
terminal to each stripped wire.
Connect the terminals to the switch
as shown.
326622126.159.png 326622126.160.png 326622126.161.png 326622126.162.png 326622126.163.png 326622126.164.png 326622126.165.png 326622126.166.png 326622126.167.png 326622126.168.png 326622126.169.png 326622126.170.png 326622126.171.png 326622126.172.png 326622126.173.png 326622126.174.png 326622126.175.png 326622126.176.png 326622126.177.png 326622126.178.png 326622126.179.png 326622126.180.png 326622126.181.png 326622126.182.png 326622126.183.png 326622126.184.png 326622126.185.png 326622126.186.png 326622126.187.png 326622126.188.png 326622126.189.png 326622126.190.png 326622126.192.png 326622126.193.png 326622126.194.png 326622126.195.png 326622126.196.png 326622126.197.png 326622126.198.png 326622126.199.png 326622126.200.png 326622126.201.png 326622126.203.png 326622126.204.png 326622126.205.png 326622126.206.png 326622126.207.png 326622126.208.png 326622126.209.png 326622126.210.png 326622126.211.png 326622126.212.png 326622126.214.png 326622126.215.png 326622126.216.png 326622126.217.png 326622126.218.png 326622126.219.png 326622126.220.png 326622126.221.png 326622126.222.png 326622126.223.png 326622126.225.png 326622126.226.png 326622126.227.png 326622126.228.png 326622126.229.png 326622126.230.png 326622126.231.png 326622126.232.png 326622126.233.png 326622126.234.png 326622126.002.png 326622126.003.png 326622126.004.png 326622126.005.png 326622126.006.png 326622126.007.png 326622126.008.png 326622126.009.png 326622126.010.png 326622126.011.png 326622126.013.png 326622126.014.png 326622126.015.png 326622126.016.png 326622126.017.png 326622126.018.png 326622126.019.png 326622126.020.png 326622126.021.png 326622126.022.png 326622126.024.png 326622126.025.png 326622126.026.png 326622126.027.png 326622126.028.png 326622126.029.png 326622126.030.png 326622126.031.png 326622126.032.png 326622126.033.png 326622126.035.png 326622126.036.png 326622126.037.png 326622126.038.png 326622126.039.png 326622126.040.png 326622126.041.png 326622126.042.png 326622126.043.png 326622126.044.png 326622126.046.png 326622126.047.png 326622126.048.png 326622126.049.png 326622126.050.png 326622126.051.png 326622126.052.png 326622126.053.png 326622126.054.png 326622126.055.png 326622126.057.png 326622126.058.png 326622126.059.png 326622126.060.png 326622126.061.png 326622126.062.png 326622126.063.png 326622126.064.png 326622126.065.png 326622126.066.png 326622126.068.png 326622126.069.png 326622126.070.png 326622126.071.png 326622126.072.png 326622126.073.png 326622126.074.png 326622126.075.png 326622126.076.png 326622126.077.png 326622126.079.png 326622126.080.png 326622126.081.png 326622126.082.png 326622126.083.png 326622126.084.png 326622126.085.png 326622126.086.png 326622126.087.png 326622126.088.png 326622126.090.png 326622126.091.png 326622126.092.png 326622126.093.png 326622126.094.png 326622126.095.png 326622126.096.png 326622126.097.png 326622126.098.png 326622126.099.png 326622126.101.png 326622126.102.png 326622126.103.png 326622126.104.png 326622126.105.png 326622126.106.png 326622126.107.png 326622126.108.png 326622126.109.png 326622126.110.png 326622126.112.png 326622126.113.png 326622126.114.png 326622126.115.png 326622126.116.png 326622126.117.png 326622126.118.png 326622126.119.png 326622126.120.png 326622126.121.png 326622126.123.png 326622126.124.png 326622126.125.png 326622126.126.png 326622126.127.png 326622126.128.png 326622126.129.png 326622126.130.png 326622126.131.png 326622126.132.png 326622126.134.png 326622126.135.png 326622126.136.png 326622126.137.png 326622126.138.png 326622126.139.png 326622126.140.png 326622126.141.png 326622126.142.png 326622126.143.png 326622126.145.png 326622126.146.png 326622126.147.png 326622126.148.png 326622126.149.png 326622126.150.png 326622126.151.png 326622126.152.png 326622126.153.png 326622126.154.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin