FATEK2007_enu Katalog sterowników.pdf

cover2.ai 2007/7/5 下午 02:12:05

The Brand You Can Rely on

CMY

AUTOMATION CORPORATION

Programmable Logic Controller

26FL., NO.29, SEC.2, JUNGJENG E. RD.,

DANSHUEI JEN, TAIPEI, TAIWAN, R.O.C.251

• Cutting edge in PLC

• State of the art technology

• Compact & Powerful

• Extensive product range

• Reliable & Durable

TEL

FAX

E-mail

+886-2-2808-2192

+886-2-2809-2618

sales@fatek.com

tech@fatek.com

www.fatek.com

Website

The specications are subject to change without prior noitce.

www.fatek.com

FBs - Series

......more than a decade of unsurpassed "Quality" and "Functionality"

FATEK2007 catalog_ok.indd 2

2007/7/5 下午 01:13:50

Contents

Features

System Coniguration

Model Speciications

• Basic main units (MA)

• Advanced main units (MC)

• NC positioning main units (MN)

• Digital I/O expansion units

• Power supplies for expansion modules

• Digital I/O expansion modules

• Thumbwheel switch input module

• 7/16-segment LED display modules

• Analog input (AI) module

• Analog output (AO) modules

• Temperature measurement modules

• AI/AO/Temperature Combo modules

• Special modules

• Communication modules (CM)

• Communication boards (CB)

• Analog I/O Boards

• Memory Pack

• PWMDA

• RFID card

• FP-08 handheld programming panel

• Data Access Panel

• Accessories

Program Development Software

Training Box

General Speciications

Instruction Sets

Dimensions

Model list

......more than a decade of unsurpassed "Quality" and "Functionality"

FATEK2007 catalog_ok.indd 3

2007/7/5 下午 01:13:55

Features

SoC-FATEK's Core Technology

The FBs-PLC’s design incorporates a “System on Chips“(SoC) developed in-house by Fatek Corporation.

The chip consists of over 120,000 gates which integrates powerful features such as a Central Processing

Unit (CPU), Hardware Logic Solver (HLS), five high-speed communication ports, four sets of hardware

high-speed counters / timers, four axes of high-speed pulse outputs for NC positioning control (with linear

interpolation or dynamic tracking) 16 high-speed interrupts or captured inputs. The FBs represents high

functionality and reliability with exceptional value compared to other PLC’s in its class.

User friendly and powerful instruction sets

The FBs-PLC has more than 300 instructions which adopts a user friendly

and readable multi-input/multi-output function structure, with multi-input

instruction structure can derive many types of functionality which other

brands of PLC’s may require the use of many instructions to achieve this.

Also the operation result can be directly sent to internal or external outputs.

To increase the program readability, the inputs or outputs for each function

instruction have their own mnemonic symbol attached and the content of

each operand is also displayed. For high-end applications, such as PLC

networking (LINK), PID control and NC positioning etc, the FBs-PLC provides

dedicated convenient instructions to assist in program development.

PLC & NC Control in one and Dedicated NC Positioning Language

NC Position Control is incorporated into the SoC of the FBs-PLC which

integrates PLC+NC control into one unit in order for resources sharing and

reducing the need of data exchange. The NC position control adopts special

positioning command language, which allows programming by mechanical

or electrical units and changing control parameters during execution.

One single unit has up to four axes outputs with a maximum frequency

of 200KHz (MC) or 920KHz (MN) and equipped with multi-axial linear

interpolation and dynamic tracking. If combined with the four sets of built-in

HHSC, it can achieve positioning control with closed loop precision.

Communication function (up to 5 ports including RS232,

RS485, USB, Ethernet and GSM)

Via the ive high-speed communication ports included in the SoC, the FBs-

PLC’s communication capability is outstanding with all ive ports operating

at a maximum speed of 921.6Kbps. Communications can be achieved

using ASCII code or the double-speed binary code. Along with FATEK's

standard protocol, Modbus ASCII/RTU/TCP or user-definable protocol

are also available. The FBs.-PLC also provides the option of six different

communication boards and eight different communication modules for

various types of communication applications. With their high speed and

functionality the FBs-PLC has the greatest number of communication ports

than any other PLC in its class. Each communication port comes standard

with LED indicators for transmission (TX) and reception (RX) to enable the

user to monitor the operation.

Integrated high-speed counters with counting frequency up

to 920 KHz

The FBs-PLC as standard has up to 4 sets of hardware high-speed

counters (HHSC) and 4 sets of software high-speed counters (SHSC). The

highest counting frequency of a HHSC is 200KHz (MC) or 920KHz (MN).

Each HHSC also has a clear and mask function. There are 8 counting

modes including U/D, U/Dx2, P/R, P/Rx2, A/B, A/Bx2, A/Bx3 and A/Bx4

which makes the HHSC very powerful and efficient. For example, if the

encoder, running at 200 pulses per revolution, adopts A/Bx4 mode the

FBs-PLC can achieve the same result that a 800 pulses per revolution

encoder can provide. The counter is implemented in the hardware so as

not to occupy CPU processing time.

Up to 4 sets of high-speed pulse width modulation

(HSPWM) output

The SoC inside the FBs-PLC incorporates four sets of hardware high-speed

pulse width modulation outputs with a maximum frequency of 184.32KHz

and 18.432KHz with resolutions of 1% and 0.1%, respectively. Different

from the PWM function operated by software alone in other brands of PLC,

the hardware driven high-speed PWM in the FBs-PLC operates with high

precision and stability which provides the user easy control with precise

accuracy.

High-speed timers (HST)

The FBs-PLC is the only PLC in this class providing 0.1mS high-speed

timers (the FBs-PLC having one 16-bit and 4 sets of 32-bit HST). Currently,

the fastest time base of high speed timers used in other brands of PLC’s is

1mS. By incorporating the interrupt function of the FBs-PLC the accuracy

of 0.1mS time base high-speed timer of FBs-PLC is further enhanced

and can easily achieve more precise speed detection or can be used as

a frequency meter. In most cases, expensive speed detection equipment

can be replaced by the economical FBs-PLC.

FATEK2007 catalog_ok.indd 4

2007/7/5 下午 01:13:56

FATEK's Powerful Communication Features

The ive communication ports in FBs-PLC can simultaneously connect to various intelligent

peripherals with available interfaces such as USB, RS232, RS485 and Ethernet. Besides

adopting FATEK standard communication protocol or Modbus protocol or conducting

communication through the FATEK communication server, the user also can use CLINK

commands to deine the dedicated protocol to actively or passively establish the connection

with any intelligent peripherals.

Single unit with 16 points of high-speed interrupt

The FBs-PLC provides 16 points of external interrupts. The interrupt is

edge driven and the user can deine which edge triggers the interrupt and

can be positive, negative or both edges. The interrupts can perform high

speed, emergency processing which can withstand the time jilter caused

by the delay and deviation of the scan time and can be used for precision

high speed positioning, machine home and high speed RPM measurement

applications.

Open communication driver

The open communication protocol of the FBs-PLC is supported

by all major brands of graphic supervisory software (SCADA) and

leading brands of Human-Machine Interfaces (HMI) and can be

directly connected with the FBs-PLC via serial and Ethernet interface.

FATEK also provides Modbus protocol and FATEK DDE standard

communication server or third-party OPC server for the user to easily

connect the FBs-PLC to various control or supervisory systems.

Up to 36 points of captured input

The SoC in the FBs-PLC has a capture input function, which captures

and stores the external pulse of an input shorter than the scanning time of

the CPU. Compared to PLC’s in this class that either lack this capability

or require highly sophisticated interrupt functions (which increase the CPU

processing time), the FBs-PLC can handle this task easily as a general input,

easily conigured with high eficiency and no detriment the CPU scan time.

User-friendly operating environment

“WinProladder” is the Windows-based ladder diagram programming

software for the FBs-PLC. It provides a user-friendly operating

environment with editing, monitoring and debugging functions which

allows the user to become familiar with the operation of the software

in a very short time. The powerful editing function of WinProladder,

assisted with keyboard, mouse and on-line help (of ladder instructions

and operating guide) greatly reduces programming development time.

Features which can displays the data registers directly in the ladder

diagram and provide multiple status pages for monitoring gives the user

the ability to monitor and debug easily.

Complete range of peripherals

In addition to the 204 models of main CPU units, the FBs-PLC also

provides 65 models of expansion I/O for selection. The expansion I/O

modules include basic DI/O and AI/O, 7/16-segment LED display module,

8 types (J,K,R,S,E,T,B,N) thermocouple, Pt100, Pt1000 RTD temperature

measurement modules. The FBs-PLC also provides a FBs-DAP LCD data

access panel which can be linked together with a single RS485 bus. The

FBs-DAP can be a simple Timer/Counter editor or it can also be used as

a simple human machine interface through the function of user deinable

keys and message display. The FBs-DAP can be equipped with a wireless

RFID sensing module and can be applied to such applications as entrance

control, parking equipment and elevator control amongst others.

FATEK2007 catalog_ok.indd 5

2007/7/5 下午 01:13:58

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: