ANSI-ASME B16.5a (1996) Addenda B16.5a (1998) - PIPE FLANGES AND FLANGED FITTINGS.pdf
(
7590 KB
)
Pobierz
AN AMERICAN NATIONAL STANDARD
ASME
B16.5a-1998
ADDENDA
to
ASME B16.5-1996
PIPE FLANGES AND FLANGED FITTINGS
NPS
v2
Through NPS 24
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
Three Park Avenue
0
New
York, NY
10016
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
Date of Issuance: October 26, 1998
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under proceduresaccredited as meeting the criteria for
American National Standards. The Standards Committee that approved the code or standard
was balanced to assure that individuals from competent and concerned interests have had an
opportunity to participate. The proposed code or standardwas made availablefor public review
and comment that providesan opportunity for additional public input from industry,academia,
regulatory agencies, and the public-at-large.
ASME does not "approve," "rate," or "endorse" any item, construction,
proprietary device,
or activity.
ASME does not take any position with respect to the validityof any patent rights asserted
in
connection with any items mentioned
in thisdocument, anddoes not undertaketo insure anyone
utilizinga standard against liability for infringement
Letters Patent, nor assumes
any such liability. Users
of
a code or standard are expressly advised that determination of the
validity of any such patent rights, and the risk
of
infringement of such rights, is entirely their
own responsibility.
Participation by federal agency representativels) or personb) affiliated with industry is not to
be interpretedas government or industry endorsement of this code or standard.
ASME acceptsresponsibility for only
of any applicable
those interpretationsissued inaccordance withgoverning
ASME procedures and policies which preclude
the issuance of interpretations by individual
volunteers.
No part of this document may be reproduced in any form,
in an electronic retrieval system or otherwise,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016-5990
Copyright
O
1998 by
THE
AMERICAN SOCIETY
OF
MECHANICAL ENGINEERS
All Rights Reserved
Printed in U.S.A.
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
ASME
B16.5a-1998
Following approval by the ASME
B
16 Committee and ASME, and
after public review, ASME
B
16.5a-
1998 was approved by the American National Standards Institute on February 20, 1998.
Addenda to the 1996 edition of ASME B16.5 are issued
in
the form of replacement pages. Revisions,
additions, and deletions are incorporated directly into the affected pages. It is advisable, however, that this
page, the Addenda title and copyright pages, and all replaced pages be retained
for reference.
SUMMARY
OF
CHANGES
This is the first Addenda to be published to ASME B16.5-1996.
Replace or insert the pages listed. Changes given below are identified on the pages
by a margin note,
(a),
placed next to the affected area. The pages not listed are the
reverse sides of the listed pages and contain
no changes.
Page
Change
Location
ASME
Foreword
address updated
V
Updated
vi¡
Roster
Committee
Contents
Updated to reflect
Addenda
changes
X
I
1.2.1
In
the third and seventh lines,
Annex
G
corrected by Errata to read
Annex
H
Revised
2.1
8
7.2.1
PS
corrected by Errata to read
NPS
9
7.6
Overall length for NPS
4
and smaller revised
8.
I
Title corrected by Errata
10-12
Table IA
(1)
A 350 Gr. LF6
Cl.
1 added to material
group
1.1
(2) A 350 Gr. LF6 Cl. 2 added to material
group 1.2
(3)
A
351 Gr. CESMN, A 351 Gr. CD4MCu,
A 35
I Gr.
CD~MWCUN,
A
182 Gr. F55,
and A 240 Gr. S32760 added to material
group 2.8
(4) New material groups
I.
15 and
3.
I7 added
(5)
A
351 Gr. CN7M deleted from material
group 3.1
(6)
General Notes added
(I)
A 350 Gr. LF6
Cl. I
added
(2) Note
(4)
added
Table 2-
I. I
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
Page
Location
Change
Table 2-
I
.2
(I)
A 350
Gr.
LF6 Cl. 2 added
(2)
Note (3) added
First line of Note
16
(1) corrected by Errata
19
20
24.1
25
Table 2-
I
.5
Table 2-
I
.7
Table 2- I.
I5
Table 2-2.
I
First line of Note
(1) corrected by Errata
Added
Working pressure for Class 600 at 1400°F
corrected by Errata to read
90
Working pressure for Class 600 at 1150°F
corrected by Errata to read
475
(I)
Working pressure for Class 2500 at 400°F
28
Table 2-2.4
31
Table 2-2.7
corrected by Errata to read
4460
(2) Working pressure for Class 400 at 850°F
corrected by Errata to read
570
A
351 Gr. CE8MN.
A
351
Gr.
CD4MCu,
A
351 Gr. CD~MWCUN,
A
182
Gr.
F55,
and
A
240 Gr. S32760 added
Revised
in
its entirety
Working pressure for Class 600 at 900°F
corrected by Errata to read
280
Working pressure for Class 400 at 900°F
re
v i
sed
Working pressure for Class 900 at 800°F
corrected by Errata to read
Table 2-2.8
32
33
35
Table 2-3.1
Table 2-3.3
36
Table 2-3.4
37
Table 2-3.5
1520
38
Table 2-3.6
Working pressure for Class
1500
at 750°F
corrected by Errata to read
2650
Working pressure for Class 900 at 800°F
corrected by Errata to read
1520
Working pressure for Class 900 at 800°F
corrected by Errata to read
39
Table 2-3.7
40
Table 2-3.8
1520
48
Table 2-3.16
Working pressure for Class 2500 at
I
150°F
corrected by Errata to read
1545
48.
I
Table 2-3. I7
Fig. 7
Added
(I)
Top left sketch for Classes 150 and 300
53. 54
revised
(2) Top left sketch for Classes 400 and Higher
revised
In
column 10, value for
NPS
4 corrected by
72
Table 9
Errata to read
4.57
Note (19) renumbered to Note (18) by Errata
84
Table 13
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
Page
Location
Change
Annex
H
Interpretations
I50
I53
ASME address updated
ASME address updated
SPECIAL NOTE:
The Interpretations to ASME
B16.5
are included in this Addenda as a separate section for the user’s
convenience. This section, however,
is not part
of
the Addenda or the edition.
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
Plik z chomika:
rajmundos9
Inne pliki z tego folderu:
ASM Metals Handbook, Vol 06.pdf
(50968 KB)
Asme_Section_IX.pdf
(54910 KB)
ASME B31.3 (2002) - Process Piping.pdf
(21579 KB)
ANSI-ASME B16.34 1998 Addenda VALVES.pdf
(7141 KB)
ANSI-ASME B16.5a (1996) Addenda B16.5a (1998) - PIPE FLANGES AND FLANGED FITTINGS.pdf
(7590 KB)
Inne foldery tego chomika:
# Kurs języka angielskiego -1000 godzin nauki PL
# Niemiecki
_ Sieci Instalacje Maszyny
02 Robert Kiyosaki - Kwadrant Przepływu Pieniędzy
03 Robert Kiyosaki - Inwestycyjny Poradnik Bogatego Ojca
Zgłoś jeśli
naruszono regulamin