FT450d manual.PDF

(6992 KB) Pobierz
HF/50 MH Z T RANSCEIVER
FT-450D
O PERATION M ANUAL
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
VERTEX STANDARD ( AUSTRALIA ) PTY., LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
944372243.457.png 944372243.468.png 944372243.479.png 944372243.490.png 944372243.001.png 944372243.012.png 944372243.023.png 944372243.034.png 944372243.045.png 944372243.056.png 944372243.067.png 944372243.078.png 944372243.089.png 944372243.100.png 944372243.111.png 944372243.122.png
T ABLE OF C ONTENTS
GENERAL FEATURE ........................................... 1
FRONT PANEL BUTTONS AND KNOBS ............ 2
DISPLAY INDICATIONS ....................................... 6
REAR PANEL JACKS .......................................... 8
SUPPLIED MH-31 A8J MICROPHONE ................. 9
ACCESSORIES & OPTIONS ............................. 10
INSTALLATION .................................................. 11
CONNESTION OF ANTENNA AND POWER SUPPLY .. 11
ABOUT COAXIAL CABLE ............................................... 12
GROUNDING ................................................................... 12
VL-1000 LINEAR AMPLIFIER INTERCONNECTIONS .. 13
INTERFACING TO OTHER LINEAR AMPLIFIER ........... 13
EASY OPERATION ............................................ 14
HOW TO USE THE [ DSP/SEL ] KNOB ............................ 15
MENU OPERATION ......................................................... 15
HOW TO USE THE [ VOICE/C.S ] SWITCH .................... 16
KEY DURATION SETTING .............................................. 17
RESETTING THE MICROPROCESSOR ........................ 18
RECEIVING ........................................................ 19
TUNING STEPS ............................................................... 19
CHANGE THE TUNING STEP
OF THE [ MAIN DIAL ] KNOB ..................... 19
CHANGE THE TUNING STEP
OF THE [ DSP/SEL ] KNOB ........................ 19
ABOUT THE [ UP ] / [ DWN ] BUTTONS
OF THE MH-31A8J ........... 20
CLARIFIER ....................................................................... 20
DIGITAL VOICE ANNOUNCEMENT ............................... 21
DIAL LOCK ....................................................................... 21
MY BANDS OPERATION ................................................ 22
MY MODES OPERATION ............................................... 23
DIGITAL VOICE RECORDER ......................................... 24
CONVENIENCE FEATURES ............................. 25
RECEIVER OPERATION
(FRONT END BLOCK DIAGRAM) ......................................... 25
IPO/ATT
(ADJUST THE RECEIVING SENSITIVITY) .................................. 26
NOISE BLANKER
(INTERFERENCE REJECTION “SIGNALS WITHIN 3 kHz”) ........... 26
AGC
(TOOL FOR COMFORTABLE AND EFFECTIVE RECEPTION) ......... 27
CONTOUR
(INTERFERENCE REJECTION “SIGNALS WITHIN 3 kHz”) ........... 28
SHIFT
(INTERFERENCE REJECTION “SIGNALS WITHIN 3 kHz”) ........... 29
WIDTH
(INTERFERENCE REJECTION “SIGNALS WITHIN 3 kHz”) ........... 30
NOTCH
(INTERFERENCE REJECTION “SIGNALS WITHIN 3 kHz”) ........... 31
DNR
(INTERFERENCE REJECTION “SIGNALS WITHIN 3 kHz”) ........... 32
RF GAIN ........................................................................... 33
Using the Automatic Antenna Tuner ............... 34
ATU Operation ................................................................. 34
About ATU Operation ....................................................... 35
SSB/AM MODE TRANSMISSION ..................... 36
TX METER SELECTION ................................................. 37
TX POWER ADJUSTMENT ............................................ 37
TRANSMITTER TIME-OUT TIMER (TOT) ...................... 38
MICROPHONE GAIN LEVEL ADJUSTMENT ................ 39
DSP MICROPHONE EQUALIZER .................................. 40
AUTOMATIC TX/RX SWITCHING
USING VOICE CONTROL (VOX) ........................... 41
MONITOR ........................................................................ 42
SPLIT-FREQUENCY OPERATION ................................. 43
QUICK SPLIT OPERATION ............................................ 43
VOICE MEMORY (SSB/AM/FM MODES) ...................... 44
CW MODE OPERATION .................................... 46
SETUP FOR STRAIGHT KEY
(AND STRAIGHT KEY EMULATION) OPERATION ..... 46
USING THE BUILT-IN ELECTRONIC KEYER ................ 47
CW SPOTTING (ZERO-BEATING) ................................. 49
USING CW REVERSE .................................................... 49
CW DELAY TIME SETTING ............................................ 50
CW SIDETONE VOLUME LEVEL SETTING .................. 50
CW PITCH ADJUSTMENT .............................................. 51
CW TRAINING FEATURE ............................................... 51
BEACON FEATURE ........................................................ 52
FM MODE OPERATION ..................................... 54
BASIC OPERATION ........................................................ 54
REPEATER OPERATION ................................................ 55
TONE SQUELCH/DCS OPERATION .............................. 56
TONE SEARCH SCANNING ........................................... 57
MEMORY OPERATION ...................................... 58
CONVENIENT MEMORY FUNCTIONS .......................... 58
MEMORY GROUPS ......................................................... 59
REGULAR MEMORY OPERATION ................................ 60
MEMORY STORAGE ................................................ 60
MEMORY CHANNEL RECALL ................................. 60
ERASING MEMORY CHANNEL DATA ..................... 61
MEMORY TUNE OPERATION .................................. 61
LABELING MEMORIES ............................................ 62
HOME CHANNEL MEMORIES ....................................... 64
HOME CHANNEL RECALL ....................................... 64
HOME CHANNEL FREQUENCY CHANGE ............. 64
QMB (QUICK MEMORY BANK) ...................................... 65
STORAGE ................................................................. 65
RECALL ..................................................................... 65
SCANNING OPERATION ................................... 66
VFO AND MEMORY SCANNING .................................... 66
PREPARATION ......................................................... 66
VFO/MEMORY SCAN ............................................... 67
PROGRAMMABLE MEMORY SCANNING
(PMS) ........ 68
OPERATION ON ALASKA
EMERGENCY FREQUENCY: 5167.5 kHz
(U.S. Version Only) ........... 69
MISCELLANEOUS SETTINGS .......................... 70
DISPLAY SETTING .......................................................... 70
BEEPER SETTING .......................................................... 71
BEEP VOLUME ......................................................... 71
BEEP TONE .............................................................. 72
AUTOMATIC POWER-OFF (APO) .................................. 73
Disposal of your Electronic and Electric Equipment
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Electronic and Electric Equipment should be recycled at a facility capable of handling these items and
their waste byproducts.
In EU countries, please contact your local equipment supplier representative or service center for
information about the waste collection system in your country.
944372243.133.png 944372243.144.png 944372243.155.png 944372243.166.png 944372243.177.png 944372243.188.png 944372243.199.png 944372243.210.png 944372243.221.png 944372243.232.png 944372243.243.png 944372243.254.png 944372243.265.png 944372243.276.png 944372243.287.png 944372243.298.png 944372243.309.png 944372243.320.png 944372243.331.png 944372243.342.png 944372243.353.png 944372243.364.png 944372243.375.png 944372243.386.png 944372243.397.png
T ABLE OF C ONTENTS
RTTY (RADIO TELETYPE) OPERATION .......... 74
SETTING UP FOR RTTY OPERATION .......................... 74
BASIC SETUP ................................................................. 74
PACKET OPERATION ....................................... 75
PACKET SETUP
(INCLUDING SUBCARRIER FREQUENCY) ........... 75
BASIC SETUP ................................................................. 75
MISCELLANEOUS AFSK-BASED
DATA MODES ................. 76
MENU MODE ..................................................... 78
USING THE MENU .......................................................... 78
MENU MODE RESET ...................................................... 78
CLONING ........................................................... 88
INSTALLATION OF
OPTIONAL ACCESSORIES .................... 90
AUTOMATIC-MATCHING 200-MEMORY
ANTENNA TUNER FC-40 OPERATION ....................... 90
ACTIVE-TUNING ANTENNA SYSTEM
(ATAS-100/-120/120A) OPERATION .................... 92
CARRYING HANDLE MHG-1 INSTALLATION ............... 94
MOUNTING BRACKET
MMB-90 INSTALLATION ............................ 95
SPECIFICATIONS .............................................. 96
FCC NOTICE ...................................................... 98
Congratulations on the purchase of your Yaesu amateur transceiver! Whether this is
your first rig, or if Yaesu equipment is already the backbone of your station, rest assured
that your transceiver will provide many hours of operating pleasure for years to come.
G ENERAL F EATURES
Super Compact HF Transceiver with IF-DSP
Built-in ATU (automatic antenna tuner)
Great HF radio performance, with uncomplicated operation, is realized with the very small FT-450D HF
transceiver.
HF + 50 MHz with 100 Watts output all mode operation
Small, compact and light-weight HF radio, 9 (W) x 3.3 (H) x 8.5 (D) in, 8.8 lb
Large 9-segment LCD display characters, provide easily read frequency indication
Black-Nega type LCD
Illumination Button
Built-in IF DSP unit that performs all of the following functions:
Modulation and Demodulation
CONTOUR
MANUAL NOTCH
DNR
WIDTH (CW narrow 300 Hz operation available without any optional filters)
Microphone equalizer built in
Speech Processor
DSP VOX operation
Two Voice memory channels included
Frequency read out function
TCXO built-in
500 memory channels
IF SHIFT
IPO
20 dB ATT built-in
Clarifier
Electronic keyer built-in
Microphone and phone jacks on the front panel
FSK-RTTY TX operation
Long wire antenna can be used by the optional FC-40
FT-450D O PERATION M ANUAL
Page 1
944372243.408.png 944372243.419.png 944372243.430.png 944372243.441.png 944372243.448.png 944372243.449.png 944372243.450.png 944372243.451.png 944372243.452.png 944372243.453.png 944372243.454.png 944372243.455.png 944372243.456.png 944372243.458.png 944372243.459.png 944372243.460.png 944372243.461.png 944372243.462.png
F RONT P ANEL B UTTONS AND K NOBS
IPO/ATT Button
This button selects the IPO or ATT feature. Available se-
lections are:
ATT:OFF/IPO:OFF ATT:OFF/IPO:ON
ATT:ON/IPO:OFF ATT:ON/IPO:ON
ATT:OFF/IPO:OFF
IPO: OFF, ATT: OFF
Attenuator is OFF, and the RF preamplifier amplifies
the incoming signal.
IPO: ON, ATT: OFF
Attenuator is OFF, and the received signal bypasses
the RF preamplifier, yielding a direct feed to the first
mixer.
IPO: OFF, ATT: ON
The received signal is reduced by 20 dB, and the RF
preamplifier amplifies the incoming signal.
IPO: ON, ATT: ON
The received signal is reduced by 20 dB, and the in-
coming signal bypasses the RF preamplifier, yielding a
direct feed to the first mixer.
The selection will be indicated in the Block Diagram on
the display.
AGC Button
This button selects the AGC characteristics for the receiver.
Press and hold in this button for one second to disable the
AGC (for testing or weak-signal reception).
NB Button
This button turns the IF Noise Blanker
on and off. Press this button to re-
duce short-duration pulse noise.
DSP Button
This button selects the DSP functions.
Available selections are CONTOUR,
NOTCH, DNR, and WIDTH.
ON/OFF Button
Press and hold in this button for one second
to turn the transceiver on or off.
PHONE Jack
A 3.5 mm, 3-contact jack accepts ei-
ther monaural or stereo headphones
with 2 or 3-contact plugs. When a plug
is inserted, the loudspeaker is dis-
abled.
N OTE :
When wearing headphones, we rec-
ommend that you turn the AF GAIN
levels down to their lowest settings
before turning power on, to minimize
the impact on your hearing caused by
audio “pops” during switch-on.
PHONES
KEY
KEY Jack
This 3.5 mm, 3-contact
jack accepts a CW key or
keyer paddles (for the
built-in electronic keyer),
or output from an external
electronic keyer. Pinout is
shown below. Key up is 5
volts, and key down cur-
rent is 0.5 mA.
Do not use the plug except the 3.5-mm 3-pin type plug. If the plug in correct size is
not used the radio may be harmed or damaged.
Page 2
FT-450D O PERATION M ANUAL
944372243.463.png 944372243.464.png 944372243.465.png 944372243.466.png 944372243.467.png 944372243.469.png 944372243.470.png 944372243.471.png 944372243.472.png 944372243.473.png 944372243.474.png 944372243.475.png 944372243.476.png 944372243.477.png 944372243.478.png 944372243.480.png 944372243.481.png 944372243.482.png 944372243.483.png 944372243.484.png 944372243.485.png 944372243.486.png 944372243.487.png 944372243.488.png 944372243.489.png 944372243.491.png 944372243.492.png 944372243.493.png 944372243.494.png 944372243.495.png 944372243.496.png 944372243.497.png 944372243.498.png 944372243.499.png 944372243.500.png 944372243.002.png 944372243.003.png 944372243.004.png 944372243.005.png 944372243.006.png 944372243.007.png 944372243.008.png 944372243.009.png 944372243.010.png 944372243.011.png 944372243.013.png 944372243.014.png 944372243.015.png 944372243.016.png 944372243.017.png 944372243.018.png 944372243.019.png 944372243.020.png 944372243.021.png 944372243.022.png 944372243.024.png 944372243.025.png 944372243.026.png 944372243.027.png 944372243.028.png 944372243.029.png 944372243.030.png 944372243.031.png 944372243.032.png 944372243.033.png 944372243.035.png 944372243.036.png 944372243.037.png 944372243.038.png 944372243.039.png 944372243.040.png 944372243.041.png 944372243.042.png 944372243.043.png 944372243.044.png 944372243.046.png 944372243.047.png 944372243.048.png 944372243.049.png 944372243.050.png 944372243.051.png 944372243.052.png 944372243.053.png 944372243.054.png 944372243.055.png 944372243.057.png 944372243.058.png 944372243.059.png 944372243.060.png 944372243.061.png 944372243.062.png 944372243.063.png 944372243.064.png 944372243.065.png 944372243.066.png 944372243.068.png 944372243.069.png 944372243.070.png 944372243.071.png 944372243.072.png 944372243.073.png 944372243.074.png 944372243.075.png 944372243.076.png 944372243.077.png 944372243.079.png 944372243.080.png 944372243.081.png 944372243.082.png 944372243.083.png 944372243.084.png 944372243.085.png 944372243.086.png 944372243.087.png 944372243.088.png 944372243.090.png 944372243.091.png 944372243.092.png 944372243.093.png 944372243.094.png 944372243.095.png 944372243.096.png 944372243.097.png 944372243.098.png 944372243.099.png 944372243.101.png 944372243.102.png 944372243.103.png 944372243.104.png 944372243.105.png 944372243.106.png 944372243.107.png 944372243.108.png 944372243.109.png 944372243.110.png 944372243.112.png 944372243.113.png 944372243.114.png 944372243.115.png 944372243.116.png 944372243.117.png 944372243.118.png 944372243.119.png 944372243.120.png 944372243.121.png 944372243.123.png 944372243.124.png 944372243.125.png 944372243.126.png 944372243.127.png 944372243.128.png 944372243.129.png 944372243.130.png 944372243.131.png 944372243.132.png 944372243.134.png 944372243.135.png 944372243.136.png 944372243.137.png 944372243.138.png 944372243.139.png 944372243.140.png 944372243.141.png 944372243.142.png 944372243.143.png 944372243.145.png 944372243.146.png 944372243.147.png 944372243.148.png 944372243.149.png 944372243.150.png 944372243.151.png 944372243.152.png 944372243.153.png 944372243.154.png 944372243.156.png 944372243.157.png 944372243.158.png 944372243.159.png 944372243.160.png 944372243.161.png 944372243.162.png 944372243.163.png 944372243.164.png 944372243.165.png 944372243.167.png 944372243.168.png 944372243.169.png 944372243.170.png 944372243.171.png 944372243.172.png 944372243.173.png 944372243.174.png 944372243.175.png 944372243.176.png 944372243.178.png 944372243.179.png 944372243.180.png 944372243.181.png 944372243.182.png 944372243.183.png 944372243.184.png 944372243.185.png 944372243.186.png
F RONT P ANEL B UTTONS AND K NOBS
C.S/VOICE Button
Press this button to activate one of the 52 functions, which
can be assigned via Menu Item “PNL-C.S.”
Press the [ F ] button followed by this button to announce the
current operating frequency (with resolution to the displayed
100 Hz digit) and operating mode.
V/M/MW Button
This button toggles frequency control between the
VFO and the memory system.
Press the [ F ] button followed by this button to copy
the current operating data from the VFO into the cur-
rently selected memory channel.
RCL/HOME Button
Press this button to recall the Quick Memory Bank
memory for operation. Press this button again to
return to the VFO or Memory mode.
Press the [F] button followed by this button to recall
the “Home” (favorite frequency) channel.
STO/VOX Button
Press this button to copy the operating in-
formation (frequency, mode, bandwidth,
and also repeater direction/shift frequency
and CTCSS functions on the FM mode) into
the Quick Memory Bank.
Press the [ F ] button followed by this button
to activate the VOX (voice-actuated trans-
mitter switching) feature in the SSB, AM,
and FM modes.
SPLIT/STEP Button
Press this button to activate split fre-
quency operation between VFO-A,
used for reception and VFO-B, used
for transmission (or vice versa).
Press the [F] button followed by this
button to enable setting of the fre-
quency step with the [DSP/SEL] knob.
When the selection is complete, press
this key again.
SCAN/PMS Button
Press this button to initiate the
upward scanning of VFO fre-
quencies or memory chan-
nels.
Press the [F] button followed
by this button to engage the
Programmable Memory Scan,
(PMS) which limits scanning
within a particular frequency
range.
METER/DIM Button
Press this button to change the meter
function in the transmit mode as fol-
lows.
PO ALC SWR PO
PO: Indicates the average power
output level.
ALC: Indicates the relative ALC volt-
age.
SWR: Indicates the Standing Wave
Ratio (Forward/Reflected).
Press the [ F ] button followed by this
button to enable adjustment of the
display dimmer level by the [ DSP/
SEL ] knob. When the adjustment is
complete, press this key again.
TUNE Button
Press this button momen-
tarily to toggle the Internal
Automatic Antenna Tuner
on/off.
Press and hold in this but-
ton to begin the automatic
Tuning.
Front Feet
The two front feet allow the transceiver to be
tilted upward for better viewing.
F Button
Press this button to activate the alternate
key functions of the six command buttons
located on the upper right corner of the
front panel.
Press and hold this button for one sec-
ond to engage the “Menu” mode.
FT-450D O PERATION M ANUAL
Page 3
944372243.187.png 944372243.189.png 944372243.190.png 944372243.191.png 944372243.192.png 944372243.193.png 944372243.194.png 944372243.195.png 944372243.196.png 944372243.197.png 944372243.198.png 944372243.200.png 944372243.201.png 944372243.202.png 944372243.203.png 944372243.204.png 944372243.205.png 944372243.206.png 944372243.207.png 944372243.208.png 944372243.209.png 944372243.211.png 944372243.212.png 944372243.213.png 944372243.214.png 944372243.215.png 944372243.216.png 944372243.217.png 944372243.218.png 944372243.219.png 944372243.220.png 944372243.222.png 944372243.223.png 944372243.224.png 944372243.225.png 944372243.226.png 944372243.227.png 944372243.228.png 944372243.229.png 944372243.230.png 944372243.231.png 944372243.233.png 944372243.234.png 944372243.235.png 944372243.236.png 944372243.237.png 944372243.238.png 944372243.239.png 944372243.240.png 944372243.241.png 944372243.242.png 944372243.244.png 944372243.245.png 944372243.246.png 944372243.247.png 944372243.248.png 944372243.249.png 944372243.250.png 944372243.251.png 944372243.252.png 944372243.253.png 944372243.255.png 944372243.256.png 944372243.257.png 944372243.258.png 944372243.259.png 944372243.260.png 944372243.261.png 944372243.262.png 944372243.263.png 944372243.264.png 944372243.266.png 944372243.267.png 944372243.268.png 944372243.269.png 944372243.270.png 944372243.271.png 944372243.272.png 944372243.273.png 944372243.274.png 944372243.275.png 944372243.277.png 944372243.278.png 944372243.279.png 944372243.280.png 944372243.281.png 944372243.282.png 944372243.283.png 944372243.284.png 944372243.285.png 944372243.286.png 944372243.288.png 944372243.289.png 944372243.290.png 944372243.291.png 944372243.292.png 944372243.293.png 944372243.294.png 944372243.295.png 944372243.296.png 944372243.297.png 944372243.299.png 944372243.300.png 944372243.301.png 944372243.302.png 944372243.303.png 944372243.304.png 944372243.305.png 944372243.306.png 944372243.307.png 944372243.308.png 944372243.310.png 944372243.311.png 944372243.312.png 944372243.313.png 944372243.314.png 944372243.315.png 944372243.316.png 944372243.317.png 944372243.318.png 944372243.319.png 944372243.321.png 944372243.322.png 944372243.323.png 944372243.324.png 944372243.325.png 944372243.326.png 944372243.327.png 944372243.328.png 944372243.329.png 944372243.330.png 944372243.332.png 944372243.333.png 944372243.334.png 944372243.335.png 944372243.336.png 944372243.337.png 944372243.338.png 944372243.339.png 944372243.340.png 944372243.341.png 944372243.343.png 944372243.344.png 944372243.345.png 944372243.346.png 944372243.347.png 944372243.348.png 944372243.349.png 944372243.350.png 944372243.351.png 944372243.352.png 944372243.354.png 944372243.355.png 944372243.356.png 944372243.357.png 944372243.358.png 944372243.359.png 944372243.360.png 944372243.361.png 944372243.362.png 944372243.363.png 944372243.365.png 944372243.366.png 944372243.367.png 944372243.368.png 944372243.369.png 944372243.370.png 944372243.371.png 944372243.372.png 944372243.373.png 944372243.374.png 944372243.376.png 944372243.377.png 944372243.378.png 944372243.379.png 944372243.380.png 944372243.381.png 944372243.382.png 944372243.383.png 944372243.384.png 944372243.385.png 944372243.387.png 944372243.388.png 944372243.389.png 944372243.390.png 944372243.391.png 944372243.392.png 944372243.393.png 944372243.394.png 944372243.395.png 944372243.396.png 944372243.398.png 944372243.399.png 944372243.400.png 944372243.401.png 944372243.402.png 944372243.403.png 944372243.404.png 944372243.405.png 944372243.406.png 944372243.407.png 944372243.409.png 944372243.410.png 944372243.411.png 944372243.412.png 944372243.413.png 944372243.414.png 944372243.415.png 944372243.416.png 944372243.417.png 944372243.418.png 944372243.420.png 944372243.421.png 944372243.422.png 944372243.423.png 944372243.424.png 944372243.425.png 944372243.426.png 944372243.427.png 944372243.428.png 944372243.429.png 944372243.431.png 944372243.432.png 944372243.433.png 944372243.434.png 944372243.435.png 944372243.436.png 944372243.437.png 944372243.438.png 944372243.439.png 944372243.440.png 944372243.442.png 944372243.443.png 944372243.444.png 944372243.445.png 944372243.446.png 944372243.447.png
Zgłoś jeśli naruszono regulamin