QPST Version 2.7 19 September 2008 This readme covers important information concerning QPST 2.7. Table of Contents 1. Installation notes 2. What's new in this release 3. Known issues 4. Release notes ---------------------------------------------------------------------- 1. INSTALLATION NOTES When installing QPST on a Win2K or WinXP system, the installing user may need administration privileges. This is a requirement to allow the installer to update some system DLLs. QPST no longer installs or runs on WinNT, Win95 or Win98. ---------------------------------------------------------------------- 2. WHAT'S NEW QPST 2.7 includes these additional features: 1) The installer will now install the SCRAMP utility in QPST\SCRAMP. 2) You MUST use the QUALCOMM USB device driver or a QPST compatible device driver on your PC if you wish to use QPST with a USB port. When used with QPST, other drivers can cause your PC to hang when you reset or disconnect the mobile. You will have to restart your PC to recover. Or you may find that the phone disappears from the QPST configuration when it resets, and not reappear until you restart QPST. ---------------------------------------------------------------------- 3. KNOWN ISSUES General: The QPST has some known problems when running on a system that is running low on disk space. (Less than 10 Megabytes.) In this situation, make more disk space available before continuing to run QPST. Note that this limitation applies mostly to the disk drive that contains the QPST executables and DLLs. However, it can also be a problem when saving NV Backups and/or Service Programming information on other drives as well. Some SURFs and FFA mobiles support both USB and serial port connectivity. QPST supports USB on Windows 2000 and Windows XP through a QUALCOMM USB device driver. You must use the mobile's Port Mapper user interface to select either USB or a UART for diagnostics. You can connect your PC to the mobile's serial or USB port, but not both at the same time. If you connect your PC to your mobile through USB, and your mobile uses power from a UDIP or other powered data interface, you should either disconnect the serial cable from the UDIP, or provide power to the mobile with a battery charger. Connecting QPST to more than one port of the same mobile will cause Software Download to fail. ---------------------------------------------------------------------- 4. RELEASE NOTES 8/29/08 QPST 2.7.323 1) WLEditor changes: -System Records now contain columns for Handoff Permitted, Hidden SSID and WLAN Sec Mode. -Profiles now contain columns for Server Name Len and Server Name. These columns are active when Authentication is set to TLS, PEAP or TTLS. -When saving, Profile Encryption and Authentication types are validated against WLAN Sec Mode of referring System Records. 2) Service Programming IWLAN bitmask items have been change to a bitmask control. 3) Fixed multi-image download file path control, which would occasionally report an incorrect path. 4) Added NV backup support for items 5895-6053. 5) Service Programming: Changed NV value for 4GV wideband setting from 0x8028 to 0x46. 6) Added support for new model IDs: ID 1, FFA7527-WinMob ID 2, FFA/SURF7630 ID 3, FFA/SURF1600-Linux ID 4, FFA/SURF1700-WinCE ID 200, SURF/FFA7600-Linux ID 201, R-MSM7630 ID 242, FFA/SURF1500-Linux ID 245, FFA/SURF1600-Linux ID 246, FFA/SURF1500-Linux ID 4002, SURF7625-Linux ID 4003, SURF7625-Linux 7/3/08 QPST 2.7.320 1) Backup all Bluetooth NV items in Software Download. 2) Add support for NV items 5701-5894. 3) Update RF NV Manager to version 1.4.31. 4) Added support for Mobile IPv6 to Service Programming. 5) Added support for bandclass bits 16:63 to UMTS Service Programming. 6) For Automation interface method CopyPCToPhone, change share mode of PC file from exclusive to deny write to allow other reader applications to open the file. 7) The synchronization code added to 2.7.307 does not work with older phones. They return an error if the max protocol version in the Hello command isn't 2. Modified synchronization code to use 2 for this parameter. 8) Added support for SURF8200A-RTR6285 as model ID 8. 9) Add Service Programming support for MSM6295. 10) Add Service Programming support for Gobi 2000 model ID 12. 11) Add Service Programming support for models 5 (FFA/SURF 7625 WinMob), 6 (FFA/SURF 7600 WinMob), 7 (FFA/SURF QST-1105 Linux). 12) Added band classes 18 and 19 to generic cdma and 17, 18 and 19 to generic hdr to PRL editor. 13) Increased timeout to transition to download mode from 30 to 45 seconds. 14) Added support for IWLAN (wireless LAN interworking) to Service Programming. 5/22/08 QPST 2.7.312 1) Added NV backup of items 5599-5700. 2) Added support for Secure Boot 2.0 to MultiImageDownload Automation function. QPST will use the model number to decide which download protocol (standard multi-image, or SB 2.0) to use. 3) Change model 13 from SB 2.0 to multi-image boot. 4) Add Service Programming support for MSM7625 model 13. 4/22/08 QPST 2.7.310 ************************** IMPORTANT ************************** 1) During NV item backup a Microsoft file API was returning errors once the count of stored NV items grew above a certain limit. This limit was dynamic and unpredictable. This QPST version uses a different algorithm to store items in the QCN file to work around this problem. QCN files created with this QPST version are not compatible with QPST software versions released prior to version 2.7.310. This version can read NV items from pre-2.7.310 QCN files, but QPST versions older than 2.7.310 can not read NV items from QCN files produced by this QPST version. QCNView will identify new QCN files as having major version 2. The original QCN file format used version 1. If you are providing QCN files produced with this QPST version to other QPST users that have an older QPST version installed, please also provide the installer for this version. ************************** IMPORTANT ************************** 2) Added Service Programming support for QSD8250/8650 models. 3) Updated RF NV Item Manager to 1.4.30. 4) Added NV item backup support for items 5285-5598 to Software Download. 5) Added support for "raw" Apps file system download to Software Download. 6) Add Download and Provisioning support for model 26 (QST1105). 7) Add Provisioning support for models 22, 24 (QSC1100), and 23, 25 (QSC1110). 8) Add combo box to Download to allow user to select boot method (SB 1.0 a.k.a multi-image, SB 2.0) for a mobile already in download mode. 9) Add support to Service Programming for IPV6 Neighbor Discovery provisioning. 10) Add Software Download support for model 13 (FFA/SURF 7625) and 14 (QSC 7630). 3/5/08 QPST 2.7.303 1) Added Software Download support for: model 15 = SURF/FFA QSD8250 Rev 2.0 model 16 = SURF/FFA QSD8650 Rev 2.0 model 17 = SURF/FFA QSD8250 Rev 1.0 model 18 = SURF/FFA QSD8650 Rev 1.0 model 22 = SURF-QSC1100 model 23 = FFA-QSC1110 model 24 = FFA-QSC1100 model 25 = SURF-QSC1110 2) Added Service Programming support for: model 19 = QSC6270/QSC6240 3) Added support for model 29 = FFA/SURF6290. 1/31/08 QPST 2.7.301 1) Roaming List Editor: Added UMB acquisition record. Added MCC-MNC based system record. 2) Increase wait time for download mode from 15 to 30 seconds. 3) Added NV backup support for items 5270-5484. 4) Updates RF NV Item Manager to 1.4.28. 5) Added support for DSP download to standard multi-image download. 12/11/07 QPST 2.7.295 1) Added support for NV items 5046-5269. 2) Added support for PRL files over 8k. 3) Add preliminary support for Secure Boot 2.0 and MSM7800. 4) Roaming List Editor: Added UMB acquisition record. Added MCC-MNC based system record. 5) Update RF NV Item Manager to 1.4.27. 9/21/07 QPST 2.7.293 1) Fixed problem where QPST port server could crash if mobile reconnects to USB during polling for a data modem. 2) Added NV backup support for items 4935-5045. 3) Add check to NV backup to make sure item returned was item requested. This error will produce the message "NV item received was not the one requested - see DBG file". 4) Update RF NV Manager to version 1.4.26. 5) Add support for concatenated PRL write to Service Programming. 6) Add -q command line switch to QCNView for quite mode. Works like -s but doesn't display any dialog boxes. 7) Fix problem where QPST server may crash during auto shut down if it has a TCP/IP client connected. 8/22/07 QPST 2.7.290 1) Updated Service Programming default values for IPv6. 2) For Automation interface phone reset function, test phone status before sending offline command. Offline will fail if phone is in download mode causing phone reset to fail. 3) Memory debug application automation - changed SaveAllRegions function to return NOERROR on success. 4) Update Service Programming to add DVB-H support to MSM6280 and 7200. 5) Service Programming will now write both the legacy and new GPS IP address and port NV items. It will attempt to read both and display whichever one returns data, giving priority to the new NV items. 6) Added NV backup support for items 4795-4934. 7) Updated RF NV Item Manager to version 1.4.25. 8) Added support for new phone IDs: ID, name, flash type, flash programmer name 31,FFA/SURF7225,NAND,NPRG7225 32,FFA6246-RTR6285-A2,NAND,NPRG6246 33,SURF6246-RTR6285-A2,NAND,NPRG6246 37,FFA6175-RF6500 (NOR),NOR,APRG6800 38,SURF6175-RF6500 (NOR),NOR,APRG6800B 39,FFA6175-RF6500 (NAND),NAND,NPRG6800 40,SURF6175-RF6500 (NAND),NAND,NPRG6800B 41,FFA6575-RF6500 (NOR),NOR,APRG6800 42,SURF6575-RF6500 (NOR),NOR,APRG6800B 43,FFA6575-...
wobloboolx